PRODUCT LIST

SILICONE RUBBER WIRE
- UL Standard - VDE Standard - Chinese Standard
TEFLON WIRE
- AWM10086HighTempe… - AWM 1330 High Tem… - AWM 1331 High Tem… - AWM 1332 High Tem… - AWM 1333 High Tem… - AWM 1577 High Tem… - AWM 1591 High Tem… - AWM 1592 High Tem… - AWM 1723 High Tem… - AWM 10362 High Te… - AWM 10126 High Te…
EV Cable
- FHLR2G - FHLR2GL - FHLR2G2GL-M - FHLR2G2G-M - FHLR2GCB2G - FHLR2GCB2GL - FHLR2GCB2GL-M - FHLR2GCB2G-M
XLPE WIRE
- AWM 3173 Irradiat… - AWM 3266 Irradiat… - AWM 3271 Irradiat… - AWM 3272 Irradiat… - AWM 3289 Irradiat… - AWM 3321 Irradiat… - AWM 3343 Irradiat… - AWM 3611 Irradiat…
MICA WIRE
- AWM 5335 GLASS FI… - ＡＷＭ5107　GLASS FI… - AWM5108 FIRE RESI… - AWM5128 GLASS FI… - AWM5134 FIRE RES… - AMP GLASS FIBER …
PVC WIRE CABLE
- AWM11627 2000V - AWM 1007 PVC Insu… - AWM 1015 PVC Insu… - AWM 1017 PVC Insu… - AWM 1430 PVC Insu… - AWM 1431 PVC Insu…
Silicone Fiber Glass Sleeving
- SRG Silicone resi… - SRB Inner Fiber G… - SR Heat Resistant… - PRG Polyvinyl chl… - HTG-410 Extreme H… - FRT Fire Resistan… - Fiber Glass Woven… - ARG Arcylic Varni… - SRT Inner Silicon…
OEM CABLE
- JGGP（JGP）13.8KV - JGGHighVoltageSil… - JGGHighVoltageSil… - JGGP(JGP)1.1KV - AGRPGLASSFIBERBRA… - AGRSiliconerubber…

INQUIRY

UL Standard > AWM3068 GLASS FIBER BRAID SILICONE RUBBER WIRE

AWM3068 GLASS FIBER BRAID SILICONE RUBBER WIRE

CONDUCTOR：bare , tinned copper,

Insulator：Silicone rubber

Glass Fiber Braiding

Silicone Resin coating

RATED VOLTAGE：300V

Test Voltage: 1500V. 15Min

RATED TEMP.：150℃

Mechanical properties: Mechnical properties

Tensile strength: ≥3.45N/mm2

Elongation at break of insulation: ≥120%

Min.Bending radius: 6×OD

Characteristics:

Silicone rubber wire & cable have very good flexibility and good performance of resistance to high temperature, range from -55℃ up to 180℃.

The use of silicone rubber, a high grade corona resistant insulation material, gives the cable excellent dielectric strength.

The braided synthetic yarn covering, which is applied directly over the insulation, gives the cable, because of its short braiding pitch and high compactness, an excellent mechnical protection by maintaining good flexibility.

The varnishing of the braiding results in good antifriction properties, high abrasion resistance and excellent chemical resistance against transformer oil, light fuel oil and most types of cleaning agents.

In the event of fire, no corrosive and toxic gases will be given off.

Hence, damage caused by fire can be kept to minimum.

AWG	Conductor			Insulation thickness		Braid	Cable OD		Resist.
NO.	Size	Sturcture	OD	Nomianl	OD	Braid	Nominal	Toler.	Ω/KM
	mm2	No./mm	mm	mm	mm	mm	mm	mm	Max.
30	0.0507	7/0.10	0.30	0.38	1.10	0.15	1.40	±0.10	374
28	0.0804	7/0.12	0.36	0.38	1.15	0.15	1.45	±0.10	214
26	0.128	7/0.16	0.48	0.38	1.25	0.15	1.55	±0.15	148
24	0.205	7/0.20	0.60	0.38	1.40	0.15	1.70	±0.15	93
24	0.205	11/0.16	0.60	0.38	1.40	0.15	1.70	±0.15	93
22	0.324	13/0.18	0.75	0.38	1.55	0.15	1.85	±0.15	55
22	0.324	7/0.25	0.75	0.38	1.55	0.15	1.85	±0.15	55
20	0.519	7/0.31	0.96	0.38	1.75	0.15	2.05	±0.20	34.6
20	0.519	21/0.18	0.96	0.38	1.75	0.15	2.05	±0.20	34.6
18	0.823	7/0.39	1.20	0.38	2.00	0.15	2.30	±0.20	23.20
18	0.823	33/0.18	1.20	0.38	2.00	0.15	2.30	±0.20	23.20
16	1.31	7/0.49	1.47	0.38	2.30	0.15	2.60	±0.20	14.60
16	1.31	52/0.18	1.55	0.38	2.35	0.15	2.65	±0.20	14.60
26	0.128	1/0.42	0.42	0.38	1.20	0.15	1.50	±0.20	142.00
24	0.205	1/0.52	0.52	0.38	1.30	0.15	1.60	±0.15	89.00
22	0.324	1/0.65	0.65	0.38	1.45	0.15	1.75	±0.15	54.30
20	0.519	1/0.82	0.82	0.38	1.60	0.15	1.90	±0.20	33.90
18	0.823	1/1.05	1.05	0.38	1.85	0.15	2.15	±0.20	21.40
16	1.31	1/1.30	1.30	0.38	2.10	0.15	2.40	±0.20	13.50